Page 25
Content 6.2.2 A-B Replay 6.2.3 Replay times 6.2.4 Replay gap 1 Welcome 6.2.5 Play speed 2 Important 6.2.6 Bookmark 6.3 Delete Files 3 Your Voice Tracer digital recorder 6.4 Record Settings 4 Start to Use 7 Music Mode 4.1 Power On/Off 7.1 Playing Mode 4.2 Recharge 7.1.1 Repeat...
Page 26
11.2 Dimensions and Weight 9 Setting Mode 11.3 System requirement 9.1 Backlight Time 11.4 Recording 9.2 Auto off 11.5 Operating conditions 9.3 Language 9.4 Key tone 9.5 Memory select 9.6 Memory, Micro-SD information 9.7 Format device 9.8 Firmware version 9.9 System time 9.10 Record timer 9.11 Record timer 10 Frequently Asked Questions...
1 Welcome Welcome to the world of Philips! We are honored by your choice and purchase of the products from Philips. You can have comprehensive technical supports from Philips from our website, e.g. user’ s manuals, software, warranty information etc.
2 Important When in dangerous environment, please carefully use the • earphones or stop using. Do not use the earphones when driving, cycling, and • Safety skateboarding to avoid traffic accident and violating laws and To avoid a short circuit, do not expose the product to water regulations.
3 Your Voice Tracer digital recorder 1 Line in Jack 2 Earphone Jack 3 USB Port What’s in the box? 4 Power On, Power Off, HOLD 5 Left built-in Microphone 6 Record/Play Indicator 7 Play/Pause 8 Menu Selection Buttons 9 Right built-in Microphone 10 Display 11 Previous Track, Fast Backward 12 Stop Button, File Folder Switch Button...
• for the first time! Note Power on: Slide down and hold POWER button for 2 seconds, the device starts automatically and then displays “PHILIPS”, as When not taking voice recording or playing audio files, on • shown below any other interface, users can press MENU button for 2 to 3 seconds to return to main interface.
4.2 Recharge • Connect the device with PC through USB cable, as follows. • Use the exclusive charger to charge the device, as follows. 2. To unlock buttons, please slide the POWER button down to When using the above methods to recharge, the device will be OFF.
5 Recording Before using the device, please read carefully the following instructions. Illustration of Recording Interface: 1. In the stop state of voice mode, press “STOP” button to select the folder you prefer. 2. Slide the recording switch to “REC” to start recording; the red “Record/Play”...
Page 33
Note Use an External Microphone to Record Prior to recording, please preset the voice activated • When using an external microphone to record, please first recording function and the record type you need. Note: plug it into the Line in jack, and then record according to the When in the Stop state, press STOP button to switch procedures of built-in microphone.
6 Voice Mode 6.1 Voice Playback 1. In the Stop Mode of recorded file, press STOP button to On the main interface you can select the voice mode with select the folder you prefer. “ ”or“ ”buttons, and then shortly press the menu button to 2.
play. When playing, press shortly the MENU button to pop up 6.2.2 A-B Replay the following playing modes: Repeat, A-B Replay, Replay times, and Replay gap, Play speed. See the below interface reference: Choose “A-B Replay” from the Playing Modes, then press MENU button to enter A-B Replay.
play speed. See the below related reference pictures: 6.2.6 Bookmark On the left side of the interface, press “+” or “-” button to When playing the audio files, long press MENU button to enter select individual or all files; on the right side of the interface, the interface of bookmark setting, shown as below.
Page 37
NOISE CUT REC: WAV format, high sound quality, bit rate: 1. MIC gain 384kbps. From the Functions Menu select “MIC gain”, then press MENU PCM REC: WAV format, high sound quality, bit rate: 3072kbps. button to enter MIC gain Menu, in which there are three MIC HQ REC: MP3 format, high sound quality, bit rate: 128kbps.
Page 38
5. The Listen In function After activating the Listen In function, you can connect an earphone to listen if there’ s any sound output. See the Listen in function setting interface picture as follows: 6. Auto divide feature recording During the course of recording, the auto divide feature recording enables recordings to be saved automatically into a new file every 30 or 60 minutes and resume recoding automatically.
7 Music mode 7.1 Playing Mode From the main interface, you can choose music mode with You can select the track you want by pressing “ ”or“ ”, “ ”or “ ” buttons, and then shortly press the MENU button then press PLAY to play.
you need to confirm the start point A , shortly press “ ” to Repeat one: repeat continuously the selected track. make confirmation. Random: Play randomly tracks in selected folder. • Set the finish mark: After setting mark A, the “B” in “A-B” on LCD display is blinking, shortly press “...
7.2 Delete Files On the play-stop interface, long press the delete button, the below menu pops up with modes: Delete file, Delete All and Exit. See the below interface picture. On the left interface, press 7.1.5 Replay gap + or – to choose delete file or delete all; on the right interface, Replay gap means the time gap between two repeats.
Note Lyrics file's name and the name of the song files need to be consistent. If the current song file matches with lyrics file, the music mode icon in the top of the screen will appear, as follows ; if no lyrics match, then no sign will be displayed as shown below If the lyrics match, long press the "menu”...
8 Radio Mode From the main menu select Radio Mode, press MENU button to enter. See the below picture of Radio Mode: You can choose Save Channel to save it. Choose Delete to delete a current saved channel or Delete all saved channels. The device can store 40 radio channels at most.
9 Setting Mode 9.2 Auto off From the main menu select Setting mode, press MENU button If there’ s no operation on the device for a set time, the system to enter. The Setting mode interface includes: Backlight, Auto automatically shuts down. If the time is set at 0, the system will off, Language, Key tone, Memory select, Memory information, not automatically shut down.
9.7 Format device You can choose to format internal or TF (micro-sd) memory by using this function. See the below picture: 9.5 Memory select You can select the memory by using this function. See the below picture: 9.8 Firmware version You can check the device’s firmware version by using this function.
9.10 Record timer Record timer: First set a start time, as system time turns to the pre-set time, the device automatically starts recording. On the There are 2 time formats to choose, namely 12-hour format functions menu, choose the “Record timer”, then press the and 24-hour format.
Answers to the frequently asked questions are listed here to solve simple problems that may occur with the device. If the problem cannot be solved, please contact the dealer or visit our official website: www.philips.com/support 10.1 Cannot switch on the device: The battery is empty, please recharge promptly.
Need help?
Do you have a question about the VTR6900 and is the answer not in the manual?
Questions and answers