Page 38
Content Voice Playback Interface Specification: Voice Playback Playing Modes Delete Files 1 Welcome Record Settings Product Features 7 Music mode 2 Important Music playback Interface illustration Safety Playing Mode Hearing safety (1)Repeat (2)Equalizer (3)A-B Replay 3 Your Voice Tracer digital recorder Delete Files What’s in the box? Overview:...
Page 39
Contrast Auto off Record lamp Device sounds Date/Time Memory select Information Format device Reset default 12 Frequently Asked Questions Cannot switch on the device: Cannot record with the device: The device cannot play recorded audio: 13 Technical Parameters Storage Dimensions and Weight System requirement Recording Operating conditions...
1 Welcome Welcome to the world of Philips! We are honored by your choice and purchase of Philips’ products. You can have Philips’ comprehensive technical supports from our website, e.g. user’s manuals, software, warranty information etc. www.philips.com Product Features One-touch Recording: Just slide the recording switch upward to start recording, turn off to save file.
2 Important When in dangerous environment, please carefully use the earphones or stop using. Do not use the earphones when driving, cycling, and skateboarding to avoid traffic accident and violating laws and Safety regulations. To avoid a short circuit, do not expose the product to rain or water.
3 Your Voice Tracer digital recorder Overview: What’s in the box? Line in Jack Power On,Power Off,HOLD Buttons TF Card Lefft built-in Microphone Record Button Stop Button ,File Folder Switch Button...
Page 43
Right built-in Microphone Display Previous Track,Fast Backward Record/Play Indicator Play/Pause Volume up Buttons Delete button Earphone Jack Next Track,Fast Forward Menu Selection Buttons Volume down Buttons USB Port Speaker...
Music, Voice, Radio , Wireless and Setting Mode. Slide and hold POWER button for 2 seconds, the device starts or shutdown automatically and then displays “Philips icon”, as shown below. Then the device displays the stopped playing interface:...
Note • Please take out the battery if the device will be idle for a long time. Battery leakage may damage the device. • In the event that the device cannot work normally, please take out the battery and put them in again. • Before replacing the battery, please first power off the device.
(2)To unlock buttons, please slide the POWER button down Note to OFF. • When moving files into or out of the device, please do not disconnect the device from the computer. PC Connection • While the device is connected to a computer, it cannot be operated manually.
5 Recording Illustration of Recording Interface: Before using the device, please read carefully the following instructions. (1) In the stop state of voice mode, press “STOP” button to select the folder you prefer. (2) press “REC” button to start recording; the red “Record” indicator is on;...
Page 48
Note Note • When the low battery icon occurs, it means the battery • Prior to recording, please preset the record type you is nearly empty and the system will automatically shut need. When in the Stop state, press STOP button down.
Use an External Microphone to Record Telephone Record When using an external microphone to record, please first Connect the telephone cable come with the device and plug it into the Line in jack, and then record according to the external telephone cable to telephone recording adapter.The procedures of built-in microphone.
6 Voice Mode On the main interface you can select the voice mode with “ ”or“ ”buttons, and then shortly press the menu button to enter. Please refer to the Voice Stop interface below: Mic gain Record type Current Folder Current File Name Current Time Voice Playback Interface Specification:...
Note Playing Modes When in Stop state, press STOP button to switch between After the audio file is selected, press the PLAY button shortly folders A, B, C, D and MUSIC. to play. When playing, press shortly the MENU button to pop up the following playing modes: Repeat, A-B Replay, Replay times, and Replay gap, Play speed.
Repeat one: repeat continuously the current track. Sequence: Play tracks sequentially in selected folder. After Delete Files playing all the tracks in the current folder, the playing stops automatically. On the stopped playing voice interface, long press the Repeat Folder: Repeat tracks on a playlist. delete button to pop up the following menu list: Delete file, Random: Play randomly tracks in selected folder.
Record timer, Auto divide. See the below related reference pictures: (1)Record type From the Functions Menu select “Record type”, then press MENU button to enter Record type Menu, in which there are four Record types to select: NOISE CUT REC, HQ REC, SP On the left side of the interface, press “+”...
Page 54
SP REC: MP3 format, bit rate: 32kbps. SLP REC: MP3 format, bit rate: 8kbps. (2)MIC sensitivity From the Functions Menu select “MIC sensitivity”, then press MENU button to enter “MIC sensitivity” Menu, in which there are two MIC sensitivity to select: High, Low. Choose a different microphone gain can achieve different record effects.
Page 55
below reference picture: On this interface, you can set a time, as the system time turns the set time, the system automatically starts recording. For instance: choose “Set date”, the following interface will pop up: In this interface, you can choose to " Record Timer” menu option set the time to start recording, choose"Duration"...
Page 56
On this interface, press “ ” or “ ” to set time. Press “ ” or “ ” to select hour and minute; press“+” or “-”to change the relevant numbers. Duration: From the “Record Timer” Menu select “Duration”, then press MENU button to enter “Duration” Menu. You can set the recording duration to 30, 60, 120 minutes or infinite.
Page 57
At the time of recording, make sure to have the earphones connected to the device to enable radio reception. Note when using record time setting, must sure the machine fitted with a battery . Otherwise the record time can’t be started at the set time.
7 Music mode From the main interface, you can choose music mode with “ ”or “ ” buttons, and then shortly press the MENU button to enter; or in the voice mode, use the switch buttons to switch to the music folder. Music playback interface is as follows: Mic gain Record type Music Folder...
Playing Mode You can select the track you want by pressing “ ”or“ ”, then press PLAY to play. When playing, shortly press the MENU button, the below menu pops up with modes of: Repeat, Equalizer and A-B Replay. See the interface as follows: Sequence: Play sequentially tracks in selected folder.
and B will be replayed for specified times. After playing specified times, the “A” in “A-B” flickers to wait for setting mark A, and the system resumes normal playing. If A-B Replay is not needed, use any of the following methods to cancel the A-B Replay mode.
Page 61
On the left side of the interface, press “+” or “-” button to select individual or all files; on the right side of the interface, press “+” and “-” to choose “ok” to confirm deletion, “cancel” to keep file; press MENU button to execute.
8 Radio Mode From the main menu select Radio Mode, press MENU button to enter. See the below picture of Radio Mode: After Auto Search is selected, the system automatically searches radio channels. When a radio channel is found, the channel will be saved automatically into radio channel list.
Page 63
If you choose FM record, the system starts recording the radio. see the interface picture below:...
9 Wireless Microphone Mode Note • please plug in the earphones. They allow radio reception. Sound can only be heard in the earphones. Select Wireless Mode on the main interface, press MENU to • On this interface, press “ ” or “ ” to switch channel. enter.
Page 65
with low sound quality may be resulted. During the course of wireless recording, earphone can be plugged in to monitor the sound being recorded.
10 The wireless microphone user device. When the device is charging power, please slide the switch to the position of “OFF”. The general charging time manual for the device is about two hours. Indicator light turns red when the device is charging power and turns off after the device being fully charged.
11 Setting Mode Backlight Time The backlight time function can be set at: 15, 30, 45 and From the main menu select Setting mode, press MENU Off. If there’s no operation on the device for the set time, button to enter. The Setting mode interface includes: the backlight turns off automatically.
If there’s no operation on the device for a set time, the system automatically shuts down. If the time is set at 0, the system will not automatically shut down. See the below auto off picture: Contrast The higher the contrast, the whiter is the LCD display. See the below interface picture of adjusting contrast: Record lamp From the Record lamp settings menu, you can choose to...
Device sounds From the Device sounds settings menu, you can choose to open or close the Device sounds. After closing Device sounds, the Device sounds will not work in any key operation. See the following picture: On this interface, you can set the current system time and display format.
to store the recording file. See the following picture: Choose “Set time”, the following interface will pop up: Information Use this function to check the remaining storage capacity anytime. You can check the memory information, Micor-SD information and firmware version of this device by using this function.
For example: select “Memory info” to show the following menu: Format device For example: select “Micor-SD info” to show the following menu: You can choose to format internal memory by using this function. See the below picture: For example: select “Firmware ver” to show the firmware version: Reset default...
Page 72
You can restore to default settings by using this function. See the below picture:...
Answers to the frequently asked questions are listed here to solve simple problems that may to the device. If the problem cannot be solved, please contact the dealer or visit our official website: www.philips.com/support Cannot switch on the device: Batteries are empty or inserted incorrectly. Replace the old battery with new one, and check if batteries are correctly ins erted.
Need help?
Do you have a question about the VTR6200 and is the answer not in the manual?
Questions and answers