Page 4
English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Please read this user manual, as it contains information about the features of this shaver as well as some tips to make shaving easier and more enjoyable.
Page 5
English future reference. The accessories supplied may vary for different products. Danger - Keep the supply unit dry. Warning - The appliance is a Class III construction. - To charge the battery, only use the detachable supply unit and charging pad (supply unit, type HQ87.
Page 6
English - This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 7
English - The charging pad is not intended for use in a car. It may interfere with the automotive electronic systems. Caution - Never immerse the charging pad in water, nor rinse it under the tap. - Always make sure the charging pad is completely dry before you connect it to the wall socket.
Page 8
English - Water may trickle out of the shaver after you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver. - Do not use the supply unit in or near wall sockets that contain an electric air freshener to prevent irreparable damage to the supply unit.
Page 9
Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. General - This shaver is waterproof. It is suitable for use in the bath or shower and for cleaning under the tap.
Page 10
English Battery fully charged When the battery is fully charged, the battery charge indicator and the ring on the pad light up white continuously. Note: Both lights switch off automatically after 15 minutes. The battery charge percentage lights up white continuously, which is shown when the shaver is moved.
Page 11
English Cleaning reminder Clean the shaver after every use for optimal performance (see 'Cleaning and maintenance'). When you switch off the shaver, the cleaning reminder flashes to remind you to clean the shaver. Travel lock When you are going to travel, you can lock the shaver to prevent it from accidentally switching on (see 'Activating the travel lock').
Page 12
English Blocked shaving heads If the shaving heads are blocked, the notification symbol continuously lights up red. The replacement reminder and the cleaning reminder alternately flash white and the shaver beeps. In this case, the motor cannot run because the shaving heads are dirty or damaged.
Page 13
English Charging with the wireless Qi charging pad Note: The charging pad is Qi compliant. Only charge the Qi compatible shaver or other Qi charging compliant appliances on the wireless Qi charging pad provided. Note: Carefully shake off excess water before placing the shaver on the Qi pad.
Page 14
English Using the shaver Always check the shaver and all accessories before use. Do not use the shaver or any accessory if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type. This symbol indicates that the shaver can be used in the bath or shower.
Page 15
English - Select your personal comfort setting (see 'Personal comfort settings'). Dry shaving Switch on the shaver. 2 Move the shaving heads over your skin in circular movements to catch all hairs growing in different directions. Make sure each shaving head is fully in contact with the skin.
Page 16
English 5 Move the shaving heads over your skin in circular movements to catch all hairs growing in different directions. Make sure each shaving head is fully in contact with the skin. Exert gentle pressure for a close, comfortable shave. Note: Do not press too hard, as this can cause skin irritation.
Page 17
English Place the click-on attachment onto the attachment holder until it locks into position with a click. Using the precision trimmer attachment You can use the precision trimmer attachment to touch up your beard, sideburns and moustache. Attach the attachment to the appliance (‘click’). 2 Switch on the appliance.
Page 18
English Attach the attachment to the appliance ('click'). 2 Slide the comb straight into the guiding grooves on both sides of the beard styler attachment (‘click’). 3 Press the length selector and then push it to the left or right to select the desired hair length setting. 4 Switch on the appliance.
Page 19
English Note: Grab the comb in the center to pull it off the beard styler attachment. Do not pull at the sides of the comb. 2 Switch on the appliance. 3 Hold the beard styler attachment perpendicular to the skin and move the appliance downwards while you exert gentle pressure.
Page 20
English 4 Moisten your face with water and apply a cleanser to your face. 5 Place the attachment on your cheek. 6 Switch on the appliance. 7 Gently move the brush across your skin from the nose towards the ear. Do not push the brush too hard onto the skin to make sure that the treatment remains comfortable.
Page 21
English Activating the travel lock Press the on/off button for 3 seconds to use the travel lock mode. While you activate the travel lock, the travel lock symbol lights up briefly and the shaver produces a short sound.When the travel lock is activated, the 3 sec.
Page 22
English Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. While rinsing the shaving unit, water may drip out of the bottom of the shaver. This is a normal occurrence. Switch on the shaver. 2 Rinse the shaving unit under a warm tap.
Page 23
English 6 Attach the shaving head holder to the bottom part of the shaving unit (‘click’). Thorough cleaning We advise you to clean the shaving heads thoroughly once a month or when the shaver does not shave as well as it used to. Switch off the shaver.
Page 24
English 6 Clean the cutter and guard under the tap. You can also use the cleaning brush to remove excess hairs before rinsing. 7 Shake off excess water. 8 Put the cutter back into the guard. 9 Place the shaving heads in the shaving head holder.
Page 25
English 2 Rinse the attachment under a warm tap. 3 After cleaning, switch off the appliance. 4 Carefully shake off excess water and let the attachment air-dry completely. Tip: For optimal performance, lubricate the teeth of the attachment with a drop of sewing machine oil regularly.
Page 26
English 7 When the cutting unit is dry, attach it to the beard styler attachment. 8 When the comb is dry, attach it to the beard styler attachment. 9 For optimal performance, lubricate the teeth of the attachment with a drop of sewing machine oil regularly.
Page 27
English Always replace the shaving heads with original Philips 2yrs shaving heads (see 'Ordering accessories'). Replacement reminder The replacement reminder indicates that the shaving heads need to be replaced. The shaving unit symbol lights up continuously, the arrows flash white and you hear a beep when you switch the shaver on or off.
Page 28
Ordering accessories To buy accessories or spare parts, visit www.philips.com/parts-and-accessories or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the international warranty leaflet for contact details). The following accessories and spare parts are...
Page 29
- This product contains a built-in rechargeable battery which shall not be disposed of with normal household waste. Please take your product to an official collection point or a Philips service center to have a professional remove the rechargeable battery.
Page 30
7 Lift out the printed circuit board with the rechargeable battery. 8 Bend the battery tags aside with a screwdriver. 9 Remove the rechargeable battery. Warranty and support If you need information or support, please visit www.philips.com/support or read the international warranty leaflet.
This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Center in your country.
Page 32
English Problem Possible cause Solution I replaced the You have not reset Reset the appliance by shaving heads, but the appliance. pressing the on/off button the display still for approx. 7 seconds. shows the replacement reminder. A shaving unit This symbol reminds Replace the shaving heads symbol has you to replace the...
Page 33
Philips appliance. If you have any difficulties obtaining information, please contact the Philips Consumer Care Center in your country. You find its...
Page 34
English Problem Possible cause Solution I don’t know with We advise you to cleanse which cleansing your skin with your favorite products I can use cleanser. You can use the cleansing cleansing gel, foam, oil, milk brush attachment. or lotions. Please do not use scrub cream or gel with particles.
Need help?
Do you have a question about the SP9871 and is the answer not in the manual?
Questions and answers