Watch a connected device Network and the Internet Common interface Troubleshooting General issues Channel issues Picture issues Sound issues Connection issues Network issues Contact Philips Product specifications Power and reception Display and sound Display resolutions Multimedia Connectivity Supported TV mounts Help version Index...
Add a new dimension to your calls and contact your friends and relatives on the big screen. You can make video calls on your TV with a Philips HD Media box and a Philips TV video camera (both sold separately). Enjoy...
TV controls Rear controls (Standby): Switch the TV on or off. 2. CH +/- (Channel +/-): Switch to the next or previous channel. (Source): Access a connected device. +/- (Volume +/-): Increase or decrease volume. Sensors 1. Remote control sensor Point the remote control at the sensor.
Page 5
(Home): Access the Home menu. 7. OK: Confirm an entry or selection. (Navigation buttons): Navigate through menus and select items. LIST: Access the TV channel list. INFO: Display information about current activity. ADJUST: Adjust TV settings. OPTIONS: Access currently available options.
TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.
Page 7
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: Never place the TV on a surface covered by a cloth or other material that can be pulled away. ...
Page 8
Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Terms of warranty ...
Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
Page 10
On the label, you can find the energy efficiency class, the average power consumption of the product in use and the average energy consumption for 1 year. You can also find the power consumption values for the product on the Philips website for your country at www.philips.com/TV.
TV menu, press the Yellow button. Visit the Philips website If you can't find what you need in the onscreen [Help], visit the Philips support website at www.philips.com/support. On the Philips support website, you can also: Find answers to Frequently Asked Questions (FAQ) ...
2 Use your TV Watch TV Switch TV on or off Switch the TV on Press the power switch on the TV. If the TV is in standby, press remote control. Note: There is a short delay before the TV responds.
Page 13
Switch TV channels Press CH +/- on the remote control or Press the Numeric buttons to enter a channel number. Manage favourites You can view all channels or only a list of your favourite channels so that you can find them easily.
Page 14
Listen to digital radio If digital radio channels are available, you can listen to them. They are installed automatically when you install the TV channels. 1. While you watch TV, press The channel list is displayed. 2. Press OPTIONS. 3. Select [Select list] > [Radio], then press 4.
Change picture format You can change the picture format to suit the video source. FORMAT. 1. Press 2. Select a picture format, then press OK to confirm. The available picture formats depend on the video source: [Auto fill]: Adjust the picture to fill the screen (subtitles remain visible).
If you have photos, videos or music files on a USB storage device, you can play the files on Caution: Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data in the device.
Page 17
Play options Watch video Press the Navigation buttons to select a video file, then press OK. Press to pause. Press to stop. Press to search backward or forward. Press to exit the content browser. Video playback options While you play video, press to access the following video options: ...
Certain websites may not display completely. Functions that require plug-ins may be unavailable. Koninklijke Philips Electronics N.V. bears no responsibility regarding the content and the quality of the content provided by the content service providers. What you need 1.
To pause TV, you must connect a USB hard drive to the TV and format it. Caution: Philips is not responsible if the USB hard drive is not supported, nor is it responsible for damage or loss of data in the device.
Pause a live TV broadcast 1. On a digital channel, press TV programme. 2. Press to continue watching. The status bar shows the following time indicators: A. When the programme was paused for the first time. B. Where the paused programme is currently playing.
View Text Select a page While you watch channels that broadcast text, you can view the text. 1. Select a channel that broadcasts text, then press TEXT. 2. Select a page in one of the following ways: Enter the page number with the Numeric buttons.
Text 2.5 With Text 2.5, you can view text with more colours and better graphics than normal text. If Text 2.5 is broadcast by a channel, it is switched on by default. To switch Text 2.5 on or off 1. Press 2.
Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. After you have switched on Philips EasyLink, the following features are available: One-touch play When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.
Page 24
Maximise display for subtitled video Some video subtitles can create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift and display the subtitles on top of the video image.
Page 25
If your TV is connected to a home theatre and there is a lag between the picture and the sound, you can synchronise them. If you are using a Philips home theatre, the audio and video are automatically synchronised. ...
TV is in standby. ADJUST to receive audio from 1. Press the connected Philips EasyLink device. If available, audio only mode is switched on. 2. Accept the prompt on the TV to turn off the TV screen.
4 Set up your TV Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press 2. Select [Setup] > [Quick picture and sound settings], then press OK.
Page 28
More sound settings You can change the settings in the Sound menu. 1. Press 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to change, then press OK: [Smart sound]: Access predefined smart sound settings. ...
Channel settings Automatic install When the TV was switched on for the first time, a full installation of channels was performed. To change your language, country and reinstall all available TV channels, you can run this full installation again. Start installation 1.
Fine-tune analogue channels If the reception of an analogue TV channel is poor, you can fine-tune the TV channel. 1. Press 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Analogue: Manual antenna installation] > [Fine tune], and then press 4.
Page 31
Install satellite channels Install satellite channels 1. While you watch TV, press 2. Select [Setup] > [Search for satellite] > [Reinstall channels]. 3. Follow the onscreen instructions to complete the installation. 4. Once complete, select [Finish], then press Select connection type While you install satellite channels, you need to set the connection type.
Language settings Menu language 1. While you watch TV, press 2. Select [Setup] > [TV settings] > [Preferences] > [Menu language]. 3. Select a menu language from the list, then press OK. Audio language Set default audio language For digital channels that are broadcast with multiple audio languages, you can set your preferred audio languages.
Universal access settings Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired. You can switch these features on or off. 1. Press 2. Select [Setup] > [TV settings] > [Preferences].
Other settings TV demo You can start a demo to find out more about the features on this TV. Note: Demos are not supported on MHEG channels. 1. While you watch TV, press 2. Select [Setup] > [Watch demos], then press OK.
Caution: Do not install a lower version of software than the current version installed on your product. Philips cannot be held liable or be made responsible for problems caused by a software downgrade. Update the software through one of these methods: ...
5 Connect your About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better.
Page 37
CVBS CVBS only transmits video. For sound, also connect to Audio Left/Right. CVBS connections provide standard picture quality. On certain models, the video input socket on your TV is labelled as VIDEO, AV IN or COMPOSITE. You can connect VGA to display PC content on the TV.
Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable. Connect the disc player to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the disc player to the TV with a composite cable (CVBS) and an audio L/R cable. CVBS AUDIO L/R...
Page 39
TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable. (SAT is available on certain models only.) Connect the satellite or digital TV receiver to the TV with an HDMI cable. Connect the satellite or digital TV receiver to the TV with a SCART cable.
Page 40
Connect the satellite or digital TV receiver to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the satellite or digital TV receiver to the TV with a composite cable (CVBS) and an audio L/R cable.
Page 41
Connect the recorder to the TV with a SCART cable. Connect the recorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the recorder to the TV with a composite cable (CVBS) and an audio L/R cable. CVBS AUDIO L/R...
Page 42
Game console Connect the game console to the TV with an HDMI cable. Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable. CVBS AUDIO L/R...
Page 43
Home theatre Connect the home theatre to the TV with an HDMI cable and an optical cable. Connect the home theatre to the TV with a SCART cable. Connect the home theatre to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
Page 44
Connect the home theatre to the TV with a composite cable (CVBS) and an audio L/R cable. CVBS AUDIO L/R Digital camera nPublish Connect the digital camera to the TV with a USB cable. (For certain camera models only) Digital camcorder Connect the digital camcorder to the TV with an HDMI cable.
Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the digital camcorder to the TV with a composite cable (CVBS) and an audio L/R cable. Connect more devices USB hard drive Connect the USB hard drive to the TV with a USB cable.
Page 46
Computer Connect the computer to the TV with an HDMI cable. Connect the computer to the TV with a DVI-HDMI cable and an audio cable. Connect the computer to the TV with a VGA cable and an audio cable.
Watch a connected device Add new device Before you can watch a connected device, Add its icon to the Home menu for easy access. See Connect your TV > Connect device (Page 38). Select from the Source menu. Note: If you connect an HDMI-CEC compliant device to the TV through the HDMI connector and switch it on, the...
Page 48
User Licence Agreement. Wi-Fi ready This section is only for Wi-Fi ready TVs. With the Philips wireless USB adapter PTA01 (sold separately), you can connect the TV to your home network wirelessly. You can enjoy the best of the Internet from...
Page 49
Start wireless setup 1. Switch on your wireless network router. 2. Connect the Philips USB adapter PTA01 to a USB connector on the TV. The wireless installation starts automatically. 3. Follow the onscreen instructions. Tip: Keep the wireless USB adapter connected to the TV.
Common interface What you can do You can watch scrambled digital TV channels with a Conditional Access Module (CAM). After the CAM is inserted and subscription fees are paid, you can watch the programme. This TV supports CI as well as CI+. CI+ supports premium HD digital programmes with a high level of copy protection.
Disconnect the power cable from the power outlet. Wait until the TV cools down before you reconnect the power cable. If the blinking reoccurs, contact Philips Consumer Care. You forgot the 4-digit code to unlock the channel blocking feature (child lock): Enter ‘8888’.
You want to rearrange or reorder the channel list: After channels have been installed, they appear in the channel list. For information about managing channel lists, including rearranging channels, see Watch TV > Manage channel lists (Page 13). Picture issues The TV is on, but there is no picture or the picture is distorted: ...
Sound issues There is a picture but sound quality is poor: If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Make sure that all cables are properly connected. ...
Philips TV community at www.supportforum.philips.com. If you wish to speak to or email a Philips representative, contact the Philips Consumer Care in your country. You can find the contact details in the leaflet accompanying this TV or at www.philips.com/support.
Ambient temperature: 5 to 40 degrees Celsius For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2). The maximum power rating, stated between brackets, is used for electrical safety (IEC 60065 Ed.
Supported audio/video files Multimedia file names must not exceed 128 characters. Supported audio/video files Multimedia file names must not exceed 128 characters. Supported DLNA-compliant media server software (DLNA is available on certain models only) Windows Media Player (for Microsoft Windows) ...
- For PFL30x7: 200mm x 200mm, M6 - For PFL3507: 400mm x 400mm, M6 Warning: Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.
For PFL3507 - 32 inch TVs: Before you mount the TV on the wall, find the correct length of the screw. To find the length of screw, add the thickness of your wall mount to the screw length, as shown in the graphic. For PFL3517 - 32 inch TVs: Before you mount the TV on the wall, find the correct length of the screw.
Page 63
Information about how to re-tune your TV during the digital Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
Page 64
Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover. If you do not re-tune your channels when advised to do so by Digital UK, you may lose some or all of your channels until you do re-tune.
Need help?
Do you have a question about the 32PFL3007H and is the answer not in the manual?
Questions and answers